The best camera mounts depend on what you need to attach and where your rig will sit, from a cage-mounted monitor to a handlebar or desk clamp. These picks cover adjustable arms, monitor holders, clamps, and a tabletop stand; check the attachment style, supported load, and device fit before choosing.
Quick Top Products
SMALLRIG 9.8-Inch Magic Arm Clamp Kit
- Combines a 9.8-inch arm with a super clamp.
- The clamp includes 1/4-inch and 3/8-inch threads.
- Double ball heads allow 360-degree adjustment.
Best For: Filmmakers who want an articulated arm and clamp for positioning a monitor, light, or microphone.
SmallRig Cool Ballhead Arm Clamp 1138
- Supports up to 1.5 kg.
- Mounts to rods, tubes, tables, frames, and tripods.
- Includes a super clamp and action camera mount adapter.
Best For: Creators mounting a compact camera, webcam, light, or microphone to a desk, tube, or frame.
SmallRig Field Monitor Mount BSE2346
- Fits 5-inch and 7-inch monitors.
- Provides 360-degree swivel and 140-degree tilt.
- Supports monitors weighing up to 1.2 kg.
Best For: Videographers attaching a 5-inch or 7-inch field monitor to a camera's cold shoe.
SMALLRIG 11-Inch Magic Arm Clamp 5311
- The 11-inch arm ends in a 1/4-inch-20 screw and retractable pins.
- Fits tubes, tables, tripod legs, and stabilizer rings from 15 to 40 mm.
- Maximum payload is 1.5 kg.
Best For: Vloggers and creators positioning an action camera, monitor, light, or microphone on a tube or table.
SMALLRIG Super Clamp with 1/4 and 3/8 Thread
- The jaw opens from 15 mm to about 40 mm.
- Includes 1/4-inch and 3/8-inch threaded holes.
- Rubber pads help prevent slipping and scratches.
Best For: Photographers who need a compact clamp for mounting a compatible accessory to a narrow surface or rod.
SMALLRIG 7-Inch Magic Arm Clamp 5310
- The kit includes a 7-inch magic arm and crab-shaped clamp.
- The mount has a 1/4-inch-20 screw and retractable pins.
- Its maximum payload is 1.5 kg.
Best For: Creators who want a shorter clamp arm for an action camera, monitor, microphone, or light.
SMALLRIG Camera Mount Clamp 4102B
- Includes a removable action camera adapter.
- The ballhead rotates 360 degrees for portrait and landscape framing.
- Moving use is limited to 350 g, below 50 km/h, and smooth terrain.
Best For: Action camera users mounting a lightweight camera on a bike or motorcycle handlebar.
SMALLRIG Magic Arm Clamp Kit
- The kit includes a magic arm clamp and action camera mount.
- A rotating friction block grips flat surfaces and round tubes.
- Recommended load capacity is 1.5 kg.
Best For: Creators who need a one-knob arm and clamp for a small camera or accessory on flat or round surfaces.
SMALLRIG Monitor Mount 2174
- Fits 5-inch or 7-inch monitors up to 1.5 kg.
- The monitor rotates up to 146 degrees.
- Attaches through a 3/8-inch threaded hole for ARRI standard.
Best For: Videographers attaching a 5-inch or 7-inch monitor to a cage or handle with an ARRI locating point.
SMALLRIG Camera Mount C Stand 3488
- Adjusts from 19 to 39 inches tall with the ballhead and clamp.
- The C-clamp fits tables up to 4.7 cm thick.
- The maximum load capacity is 3 kg.
Best For: Streamers, interviewers, and tabletop creators who need a height-adjustable desk-mounted camera or light stand.
Long Reach for Monitors and Lights
SMALLRIG 9.8 Inches Magic Arm Clamp Kit with 1/4" and 3/8" Threaded Holes
This kit pairs a 9.8-inch articulating arm with a super clamp, giving you room to position an accessory away from a cage or support point. The arm has 1/4-inch screws at both ends, while the clamp offers 1/4-inch and 3/8-inch threads and opens from 15 mm to 54 mm.
Double ball heads rotate 360 degrees, and rubber cushions help protect contact surfaces. It suits a flexible video rig, though the kit is not corrosion-resistant and is not intended for seawater use.
Best For: Filmmakers who want an articulated arm and clamp for positioning a monitor, light, or microphone.
| Pros | Cons |
|---|---|
|
|
Choose this kit when positioning flexibility matters more than a compact, single-piece holder. The 9.8-inch arm reaches farther than a direct monitor mount, and the clamp attaches to varied surfaces.
Check the clamp opening against the place you plan to attach it, and confirm your accessory accepts the arm's 1/4-inch screws. Its seawater limitation makes it a poor fit for marine shoots.
Desk and Tube Mount with GoPro Adapter
SmallRig Cool Ballhead Arm Super Camera Clamp Mount Double Ball Adapter, Fence Desk Table Mount for Ronin-M for Insta360, for Gopro - 1138
The Cool Ballhead Arm 1138 combines a super clamp with a double ball adapter and an action camera adapter. Its 1/4-inch-20 screw supports a range of small rig accessories, while the clamp can attach to a rod, tube, table, frame, or tripod without drilling.
SmallRig gives it a maximum supported load of 1.5 kg and uses aluminum and stainless steel in the construction. A safety rope is advised for dynamic setups, so factor that into action-camera placement and movement.
Best For: Creators mounting a compact camera, webcam, light, or microphone to a desk, tube, or frame.
| Pros | Cons |
|---|---|
|
|
This is a practical choice for a small camera or accessory that needs to attach to a nearby tube, desk, or frame. The included action camera adapter broadens the mounting options, while the 1.5 kg ceiling calls for checking the weight of the complete accessory setup.
If the mount will move with a vehicle or rig, use the recommended safety rope and make sure the clamp has a secure surface.
Cold Shoe Monitor Holder for Field Rigs
SmallRig Field Monitor Mount Holder with Cold Shoe and 1/4" Inch Screw for 5 Inch and 7 Inch Monitor, with 360 Degree Swivel and 140 Degree Tilt, Rubber Cushion, Aluminum Alloy Build - BSE2346
This holder is designed for 5-inch and 7-inch monitors and connects to a camera or another mounting system through a cold shoe adapter. A bottom 1/4-20 screw secures the monitor, while the mount provides 360-degree horizontal swivel and 140-degree vertical tilt.
Rubber cushions protect the monitor's contact surface, and the CNC-machined aluminum body supports monitors up to 1.2 kg. The package includes a hex spanner.
Its cold shoe connection is convenient on compatible rigs, but it is a specific monitor holder rather than a general clamp.
Best For: Videographers attaching a 5-inch or 7-inch field monitor to a camera's cold shoe.
| Pros | Cons |
|---|---|
|
|
Choose this holder when your field monitor fits its supported size range and your camera setup has a compatible cold shoe. Its broad swivel and tilt range helps with different filming positions, while the 1.2 kg limit is important when weighing the monitor and any attached accessories.
For a cage with an ARRI locating point or a clamp-on mounting location, compare the connection type before buying.
11-Inch Anti-Twist Arm for Action Cameras
SMALLRIG 11" Magic Arm Clamp with 1/4"-20 Screw & Retractable Pins
The 5311 combines an 11-inch magic arm with a crab-shaped clamp and a 1/4-inch-20 screw with retractable pins at one end. Those pins help resist device twisting, while the clamp fits tubes, tables, tripod legs, and stabilizer rings from 15 to 40 mm in diameter.
Its maximum payload is 1.5 kg, and the joints can be adjusted together with the wingnut. This longer arm offers more reach than compact clamp mounts, but its payload remains modest; check the full camera and accessory weight before mounting.
Best For: Vloggers and creators positioning an action camera, monitor, light, or microphone on a tube or table.
| Pros | Cons |
|---|---|
|
|
This arm suits creators who need a longer reach from a tube, tripod leg, table, or stabilizer ring. The pin-equipped 1/4-inch connection helps with compatible action-camera cages, and the wingnut adjusts the joints together.
Compare its 11-inch reach with the space available around your rig, then include the camera and attached accessories in the payload check. Consider a shorter mount when compact storage matters more.
Compact General-Purpose Super Clamp
SMALLRIG Super Clamp with 1/4 and 3/8 Thread for Cameras, Lights, Umbrellas
This single super clamp provides a straightforward way to attach compatible gear to a surface between 15 mm and 40 mm thick. It has 1/4-inch and 3/8-inch threaded holes for adding accessories such as a ballhead or magic arm, and rubber pads help reduce slipping and scratching.
The body combines aluminum alloy and stainless steel. It does not include an arm or camera adapter, so plan for the separate connection hardware needed by your setup.
Confirm the jaw opening and the accessory's thread before buying.
Best For: Photographers who need a compact clamp for mounting a compatible accessory to a narrow surface or rod.
| Pros | Cons |
|---|---|
|
|
Pick this option for a basic clamp point when you already have a compatible arm or directly mountable accessory. Its 15 mm to 40 mm jaw range suits narrower surfaces than some of the larger clamp kits, and the two thread types add flexibility.
Since the package contains only the clamp, check whether your camera or accessory connects directly or requires a separate ballhead, magic arm, or adapter.
Compact 7-Inch Anti-Twist Clamp Arm
SMALLRIG 7 Inches Magic Arm Clamp, with 1/4 Screw & Anti-Deflection Pin
The 5310 pairs a 7-inch magic arm with a crab-shaped clamp, giving a rig an adjustable reach for mounting compatible devices. A 1/4-inch-20 screw and retractable pins connect accessories, and the clamp fits tubes, tables, tripod legs, and stabilizer rings 15 to 40 mm in diameter.
It is rated for a maximum payload of up to 1.5 kg. Its joints move together when the wingnut is loosened, then lock when tightened.
This is a useful compact configuration; verify that the reach places the device where you need it.
Best For: Creators who want a shorter clamp arm for an action camera, monitor, microphone, or light.
| Pros | Cons |
|---|---|
|
|
Choose the 5310 for a compact clamp arm when its 7-inch reach is enough. Its 1.5 kg payload and anti-twist connection help secure compatible accessories, and the shorter arm can fit into a tighter rig.
Check the distance from the clamp point to the desired accessory position, and confirm the mounting surface falls within its stated diameter range.
Handlebar Mount with Motion Limits
SMALLRIG Camera Mount Clamp, Gopro Motorcycle and Bike Handlebar Mount Kit
This clamp kit includes a removable action camera adapter and a 360-degree ballhead for portrait or landscape positioning. Its jaw accommodates a rod from 14 mm minimum and a surface up to 65 mm thick, covering handlebars, tripods, tables, and stabilizer rings.
SmallRig distinguishes stationary capacity from moving use: the maximum at rest is 3.5 kg, while motion use has a 350 g maximum, a speed limit below 50 km/h, and a recommendation to avoid rough terrain and use a safety cord. Those motion restrictions are central to choosing this mount.
Best For: Action camera users mounting a lightweight camera on a bike or motorcycle handlebar.
| Pros | Cons |
|---|---|
|
|
This is the clearest fit for a lightweight action camera on a handlebar, provided your setup stays within the motion-use limits. The 3.5 kg stationary rating should not be used to plan a moving rig: the separate 350 g motion maximum, speed guidance, and safety cord recommendation govern that use.
Check the bar diameter and the complete camera-and-adapter weight before taking it on a ride.
Friction-Focused Clamp and Magic Arm Kit
SMALLRIG Magic Arm Clamp Kit, Camera Mount Friction Arm with Super Clamp
This kit combines a magic arm, super clamp, and action camera mount, with an anti-deflection design at the connection point. A rotating triangular prism friction block helps the clamp grip flat edges as well as round tubes.
The arm adjusts with one knob and has a recommended load capacity of 1.5 kg. Cushions on the clamp and at the top of the arm protect contact surfaces and add friction.
It is intended for small cameras, monitors, lights, webcams, action cameras, and microphones, so check the complete load before attaching heavier equipment.
Best For: Creators who need a one-knob arm and clamp for a small camera or accessory on flat or round surfaces.
| Pros | Cons |
|---|---|
|
|
This kit is a good candidate when the clamp must grip either a flat table edge or a round tube and you want the arm and action-camera adapter together. The one-knob adjustment keeps positioning simple, while the 1.5 kg recommendation favors smaller accessories.
Check the contact surface and full payload; a larger rig may call for a different mounting system with a suitable documented capacity.
ARRI Mount for 5- and 7-Inch Monitors
SMALLRIG Monitor Mount EVF Holder Support with Locating Pins for ARRI Standard - 2174
The 2174 attaches a field monitor to a cage or handle through a 3/8-inch threaded hole for ARRI standard. It supports 5-inch or 7-inch monitors up to 1.5 kg and lets the monitor rotate up to 146 degrees using a single axis.
The thumbscrew enables hand tightening, with a hole for an Allen wrench when you want additional tightening. A cage without ARRI locating holes may require an optional mini plate, so check the mounting point before choosing this holder.
Best For: Videographers attaching a 5-inch or 7-inch monitor to a cage or handle with an ARRI locating point.
| Pros | Cons |
|---|---|
|
|
Choose this holder when your cage or handle already has the ARRI-style 3/8-inch mounting point and you want a dedicated monitor attachment. Its 1.5 kg capacity covers the monitor within the stated limit, while rotation is more limited than holders with broader pan-and-tilt movement.
If your cage lacks locating holes, account for the optional mini plate and check that your monitor falls within the supported size range.
Tall Tabletop Stand for Desk Shoots
SMALLRIG Camera Mount C Stand, 15"-35" Adjustable Desk Clamp Table Tripod
This desk mount uses a C-clamp and three extending pole sections to position a camera, phone, or ring light above a table. Its listed height range is 19 to 39 inches with the ballhead and clamp, and the 1/4-inch ballhead rotates 360 degrees with front tilt adjustment.
The maximum load is 3 kg, and the clamp fits tables up to 4.7 cm thick. The stand saves desk space compared with a floor tripod, but it needs a compatible table edge and a setup within the stated load limit.
Best For: Streamers, interviewers, and tabletop creators who need a height-adjustable desk-mounted camera or light stand.
| Pros | Cons |
|---|---|
|
|
Pick this stand for a desk-based filming setup that needs more height than a small clamp arm provides. The 19-to-39-inch range and ballhead offer flexible placement for cameras or lights, while the 3 kg limit and table thickness determine whether it suits your equipment and desk.
Check the edge shape and available clearance before buying, especially if you plan to position the camera above a work area.
How to Choose Camera Mounts
How We Picked Camera Mounts
This roundup focuses on products that directly support or position a camera, monitor, light, microphone, or action-camera accessory. It includes clamps for desks and tubes, articulated arms for repositioning gear, dedicated monitor holders, a handlebar mount with explicit motion limits, and a desk stand for higher camera placement.
Model-specific cages, handles, power holders, and rig-building parts are outside the core selection because they serve narrower roles or require additional mounting hardware.
We also considered whether the mounting interface and use limits are clear enough to guide a purchase. Jaw range matters for clamp mounts; thread and shoe types matter for rig connections; payload and motion restrictions matter for heavier or moving setups.
A compact clamp, a longer articulated arm, and a tabletop stand solve different positioning problems, so the right pick depends on the rig rather than the broad label camera mount.
Comparing Camera Mount Types
A bare super clamp such as the SMALLRIG clamp is compact and leaves the choice of arm or adapter to you. Clamp kits add that connecting arm and sometimes an action-camera adapter.
The 9.8-inch kit is suited to longer positioning, while the 7-inch and 11-inch 5310 and 5311 options trade reach for different placement needs. Check each clamp's opening, supported surface, and attachment end before assuming two clamps fit the same location.
Monitor holders use a more specific interface. The BSE2346 connects through a cold shoe and supports 5-inch or 7-inch displays with 360-degree swivel and 140-degree tilt.
The 2174 instead attaches through an ARRI-style 3/8-inch point and supports up to 146 degrees of rotation. The 1138 and 5311 provide 1/4-inch-20 connections for broader accessory use.
Compatibility comes down to the receiver on your camera cage or handle and the mount interface on the accessory.
| Product | Standout features | Best for |
|---|---|---|
| SMALLRIG 9.8-Inch Magic Arm Clamp KitCheck Price |
| Filmmakers who want an articulated arm and clamp for positioning a monitor, light, or microphone. |
| SmallRig Cool Ballhead Arm Clamp 1138Check Price |
| Creators mounting a compact camera, webcam, light, or microphone to a desk, tube, or frame. |
| SmallRig Field Monitor Mount BSE2346Check Price |
| Videographers attaching a 5-inch or 7-inch field monitor to a camera's cold shoe. |
| SMALLRIG 11-Inch Magic Arm Clamp 5311Check Price |
| Vloggers and creators positioning an action camera, monitor, light, or microphone on a tube or table. |
| SMALLRIG Super Clamp with 1/4 and 3/8 ThreadCheck Price |
| Photographers who need a compact clamp for mounting a compatible accessory to a narrow surface or rod. |
| SMALLRIG 7-Inch Magic Arm Clamp 5310Check Price |
| Creators who want a shorter clamp arm for an action camera, monitor, microphone, or light. |
| SMALLRIG Camera Mount Clamp 4102BCheck Price |
| Action camera users mounting a lightweight camera on a bike or motorcycle handlebar. |
| SMALLRIG Magic Arm Clamp KitCheck Price |
| Creators who need a one-knob arm and clamp for a small camera or accessory on flat or round surfaces. |
| SMALLRIG Monitor Mount 2174Check Price |
| Videographers attaching a 5-inch or 7-inch monitor to a cage or handle with an ARRI locating point. |
| SMALLRIG Camera Mount C Stand 3488Check Price |
| Streamers, interviewers, and tabletop creators who need a height-adjustable desk-mounted camera or light stand. |
Choosing a Camera Clamp for a Desk, Tube, or Bike
For a desk edge or tripod leg, compare the jaw range with the actual surface thickness or diameter. The 1138 clamps onto rods, tubes, tables, frames, or tripods, while the 5310 and 5311 fit specified tube, table, tripod-leg, and stabilizer-ring diameters.
The 3488 tabletop C-stand is a different approach: it raises a camera or light above the desk, but requires a table edge within its thickness limit and enough overhead clearance.
For bike or motorcycle use, the 4102B has explicit restrictions for moving setups. Its motion-use payload is 350 g, and the guidance includes staying below 50 km/h, avoiding rough terrain, and using a safety cord.
Do not use its stationary 3.5 kg figure to plan a moving camera rig. Check the complete camera and adapter weight against the motion limit, then verify that the clamp matches the handlebar.
Matching Reach, Payload, and Camera Mount Compatibility
Articulated arms are useful when a monitor or light needs to sit away from the clamp point. A longer arm provides more reach but can take up more space around the setup; shorter arms fit tighter positions.
Check that the accessory's thread, shoe, or action-camera adapter matches the arm, and consider the payload of the complete mounted assembly rather than the camera alone. The documented limits differ among products, so use the specific mount's own figure.
A monitor's diagonal size is only one compatibility check. Also confirm that its mounting screw or locating points match the holder, and include any attached accessories in the load.
Cold shoe mounting is convenient for compatible camera tops, while ARRI locating points require a matching cage or handle. If a product's connection is unclear for your setup, identify the required plate or adapter before ordering.
Who Should Buy Which Camera Mount
Choose the 3488 tabletop stand if you need adjustable height for streaming, desk interviews, or overhead workspace placement and your table fits its clamp. Choose a dedicated monitor holder when your camera cage provides the matching cold shoe or ARRI mounting point.
For repositioning a small accessory from a tube or table edge, compare the 7-inch, 9.8-inch, and 11-inch arm options by reach and clamp compatibility.
Choose the 4102B for a lightweight action camera on a handlebar only when you can follow its stated motion limits. The basic super clamp suits a rig builder who already owns the needed arm or adapter.
For a flexible small-camera setup with the adapter included, the 1138 or friction-block clamp kit is a more complete route. In every case, match the mounting interface, surface dimensions, and supported load to the equipment you will actually attach.